80
Handling the Watch
◆ Checking the reference position
If any of the hands are not aligned at the 12 o'clock position, or if the date indication is
misaligned, check the reference position.
* If the second hand is moving in two-second increments (insucient charge warning), charge the watch rst (see page 86).
Set the crown to
Position
0
.
Hold down the button (for approximately 5 seconds) until the charge
hand begins to move.
• All hands as well as the date indication moves to the reference position.
• Do not pull the crown out while checking the reference position. Doing so will
result in misalignment in the current time indication.
1 2
Position
0
While holding
down the button
with a narrow-
tipped object,
keep your eyes
on the tip of the
object.
To Next Page
Loading...
