9
BASIC OPERATION
To operate your LCD TV, you may use the TV remote control or upper panel buttons to select input
source, change channels, or adjust volume.
Turning on the LCD TV
Before using the LCD TV:
1. Connect external equipments properly.
2. Insert the power cord. (The power LED will light red)
Power On/Off
To turn the LCD TV on/off :
Press POWER button on the bottom of the cabinet or press POWER key on your remote control to
turn on/off the TV. The power LED indicator lights green when the LCD TV is on.
Selecting input source
Press INPUT key and use ▲▼◄► to select the required input source between PC, HDMI,TV, AV,
SVIDEO, and YPbPr.
To confirm the selection, press ENTER.
Volume Adjust
Press + VOL - to adjust volume.
To turn off the sound, press MUTE. To restore volume, press MUTE again, or press + VOL - directly.
Channel Select
Press number keys or ▲CH▼ keys to select the desired channels.
The “100” number key is used for selecting channel numbers above 100.
Ex: the desired channel is 8--Press 0 → press 8, or press 8 only.
Ex: the desired channel is 108--Press 100 → Press 0 → press 8.
Return to the previous channel, press RETURN key.
Sleep Time Setting
Repeatedly press SLEEP key to set the off timer. The function is used to automatically shut off the
LCD TV after a preset period of time passed.
There are several times for choice -- 15min, 30min, 45min, and 60min.
Sound
Sound Mode Select
Repeatedly press SOUND to select the sound mode between User, Standard, Movie, and
Music.
MTS Select
Press MTS key to set up MTS system.
The function is to provide multi-channel TV sound. MTS can receive Stereo, SAP (Secondary
Audio Program), or Mono sound. SAP feature permits the TV station to broadcast other
information, such as audio in another language.
**Choose the available sound output for channels that is preset by TV broadcasting station.
Video
Picture Mode Select
Repeatedly press PICTURE key to select picture mode between User, Standard, Movie, and
Vivid.
English
To Next Page
Loading...