18
Using each function (mode)
<Total elapsed time measurment>
(1) The chronograph starts or stops each time button
Ⓐ
is pressed.
(2) To reset the chronograph, press button
Ⓑ
after it is stopped.
<Split time measurment>
(1) The chronograph starts or stops each time button
Ⓐ
is pressed.
(2) Press button
Ⓑ
during a time measurement, and the watch shows a split time for
10 seconds. While a split time is shown, “SPLIT” will blink.
Each time button
Ⓑ
is pressed, the chronograph shows the latest split time.
(3) To reset chronograph, press button
Ⓑ
after it is stopped.
Reset
*1
StopMeasurement
Split time
*1: Automatically returns
to measurement mode
after 10 seconds.
Ⓐ
Ⓐ
Ⓑ
Ⓑ
Ⓑ
To Next Page
