Citizen CL-E720 - Troubleshooting

-15-
9. Troubleshooting
If an error is detected, an alarm will sound and an LED on the control panel will
display the nature of the error.
List of error displays (For CL-S52X/53X/62X/63X)
Error
Print
LED
Condition
LED
Error
LED
Media Out
(media location cannot be
detected)
OFF
OFF
ON
OFF
ON
Auto Cutter Abnormality
(such as blade jamming)
OFF
OFF
ON
Abnormal auto-cutter
temperature
OFF
ON
OFF
ON
OFF
List of error displays (For CL-S400DT/E720/E730/E720DT)
Error LCD Display PowerLED
Paper jam
Error
Paper Jam
Flashing (red)
Auto-Cutter Abnormality
Error
Cutter Fail
Flashing (red)
Cutter motor temperature
abnormality
Alarm
Cutter Hot
Flashing (red)
CA
UTION
Contact your supplier or service representative, if the following conditions
are observed.
z The cutter does not cut the media well.
The blade of the cutter may be worn out or covered by a label glue.
z Above error condition is occurred.