79
Appendixes
Using and Connecting to LinkServer
1
Start a Web browser on a computer connected to the same network as
the printer and input the IP address set in the printer to be connected
in the address bar (red frame part). (If IP address is '169.254.1.10', input
'http://169.254.1.10'.)
There are three types of rights for the LinkServer, i.e. User, Operator,
and Administrator. The display menu can be changed based on
the user privileges so as to limit the operation of the LinkServer
accordingly.
The home screen for User rights will be displayed when connecting.
Home screen (User rights)
2
A conrmation screen is displayed when one presses the [LOG IN]
button.
Conrmation screen
• The factory default setting for Operator authentication
The user name and password to be entered are both "Operator".
• The factory default setting for Administrator authentication
The user name and password to be entered are both"Admin".
Interfaces
To Next Page
Loading...
Need help?
General
