Citizen CL-S400DT - Page 31

31
Chapter 2 Printer Operation
Mode Settings
6. Save Changes to Settings.
Unless you save your settings, your changes will be lost
when you turn o the printer.
To Save Changes
1
Press the

key twice to display
the message “Save Settings No-
Discard”.
2
Press the

key or the

key
to display the message “Save
Settings Yes-Save”.
3
Press the

key.
The new settings will be saved
and the printer will return to the
“On Line Ready” screen.

Changing the Interface and Emulation Settings
Changes to interface or emulation settings require a printer restart (or
reboot) to take eect. The printer will oer to do this when needed by
displaying the following message after saving the settings:
4
The screen shown on the right
will be displayed when “Save
Settings Yes-Save” is selected.
5
Press the

key or the

key to
display the message “Reboot
System Yes”.
6
Press the

key and reboot the
printer.
To Discard Changes
1
Press the

key twice to display
the message “Save Settings No-
Discard”.
2
Press the

key.
The printer will return to the “On
Line Ready” screen.
The new settings will be lost
when the printer is turned o.
Save Settings
No-Discard
Save Settings
Yes-Save
On Line
Ready
Reboot System
No
Reboot System
Yes
Save Settings
No-Discard
On Line
Ready