32
Chapter 2 Printer Operation
Mode Settings
Example of changing a menu
(p.29)
Printing a List of Settings
You can get a list of the conguration settings in two ways:
- Press MENU key whilst turning the printer on. The POWER LED lights up
and “Print Settings” is displayed on the LCD. After printing, the printer
will enter Menu Setup Mode.
- You can access the conguration print via the “Test Mode, Print Pattern,
Current Cong” from the setup menu.
Machine Information
Model Number : CL-S400DT
Boot Version : ****
ROM Version : ********
ROM Date(DD//MM//YY) : XX/XX/XX
ROMCheck Sum : ****
FPGA Version : ****.****
Head Check : OK
Print Counter : 0002.234km
Service Counter : 0002.234km
Cut Counter : 0
Sensor Monitor : 1.50V
Option Interface : None
Current Menu Setting
[Global Config Menu]
Config set : 1
[PageSetup Menu]
Print Speed : 6 IPS
Print Darkness : 10
Darkness Adjust : 00
Continuous Media Length : 4.00 inch
Vertical Position : 0.00 inch
Horizontal Position : 0.00 inch
Vertical Image Shift : 0.00 inch
Auto Side Shift : 0 dot
Media Sensor : See Through
Small Media Adjustment : Off
Small Media Length : 1.00 inch
Symbol Set : PM
[System Setup Menu]
Sensor Level : 1.7 V
Paper End Level : 2.80 V
Error Reporting : On Printing
Buzzer Select : On
Metric/Inch : Inch
Max Media Length : 10.00 inch
Setting Lock : Off
Keyboard Lock : Off
Standby Mode : Off
Standby Timer : 5 min
Control Code : STD
Emulation Select : DM4
Emulation Auto Detect : On
[After Print Menu]
AutoConfigure : On
Function Select : Tear
Cutter Action : Backfeed
Paper Position : 0.00 inch
Menu Key Action : Enters Menu
[Interface Menu]
RS-232C Baudrate : 9600
RS-232C Parity : None
RS-232C Length : 8 bit
RS-232C Stop bit : 1 bit
RS-232C X-ON : Yes
IEEE1284 : On
USB Device Class : Printer
USB VCOM Protocol : Auto
<Example of Datamax® emulation selected>
Note: Citizen continually enhances its printers with new options and
settings based on our customer’s requests. Extra or changed menu
items may appear on the above print out in some cases.
To Next Page
Loading...
