Citizen CL-S400DT - Page 35

35
Chapter 2 Printer Operation
Top Menu Sub Menu Default Menu Remarks
Buzzer Select Exec/Err Exec/Err
All
Error
Key
None
Setting buzzer sounding conditions.
Metric/Inch
[Metric/Inch Sel]
Inch Inch
mm
Sets the units.
Max Media Length
[Max Media Len]
10.00 inch
254.0 mm
1.00 to 50.00 inch
25. 4 to 1270.0 mm
Sets the maximum media length.
Settings Lock O On
O
Prevents a command changing the set value.
Keyboard Lock O On
O
Prevents a change by a key operation.
Hold down the Menu Key for at least 4
seconds to enter the Menu Setup Mode
when setting the “On” menu.
Standby Mode O On
O
Choose the Standby Mode.
If you switch on the Standby Mode, the
printer will go into power-saving mode after
the elapse of the time set by the Standby
Timer.
Standby Timer 5 min 1 to 1440 min You can set the time it takes for the machine
to go into Standby Mode.
Control Code STD STD
ALT
ALT-2
Switches command mode of DMX mode.
Emulation Select
[Emulation Sel]
DM4 DM4
DMI
DPP
ZPI2
Selects DataMax®/Zebra® compatibility
DM4: DataMax® 400
DMI: DataMax® IClass
DPP: DataMax® Prodigy Plus®
ZPI2: Zebra® 2844Z
Emulation Auto
Detect
[Emulation Auto]
On On
O
Full Auto
Setting emulation (as above) auto detection.
After Print AutoCongure
[Auto Cong]
On On
O
Automatically congures optional devices.
On .....AutoCongure enabled (Regardless
of whether Function Select is set, if a
peeler or cutter is installed, each mode
is set automatically.)
O ....AutoCongure disabled (A peeler of
cutter is installed, but to not operate
the peeler or cutter, turn it O and
the operation is selected by Function
Select.)
Function Select
[Function Sel]
Tear O
Tear
Peel On*
Cut On**
Selects the operation when the
AutoCongure is set to O. Designates the
paper position based on each option. The
operation of this device is enabled during
selection. At the same time, the parameters
of the f command of Prodigy Plus are
emulated for each optional device.
* Only when peeling option is mounted.
**Only when cutter is mounted.
Mode Settings
[Datamax® Emulation]