Citizen CL-S700 Programming Manual

CITIZEN Android Label Print SDK — Programming Manual
81
2.3.17 drawCircle method
Syntax
int drawCircle (int x, int y, int radius)
Parameters
Parameter
[IN/OUT]
Description
Setting range
x
[IN]
Start position
(X-coordinate, center)
0000 - 9999
* The origin is at bottom-left.(0, 0)
y
[IN]
Start position
(Y-coordinate, center)
radius
[IN]
Radius
0000 - 0398
Description
Draws a circle of the specified radius.
Return value
Returns CLS_SUCCESS(0) on success, an error code otherwise. See "2.1 Return value" for the error
codes.
Example
design.drawCircle(50, 50, 15);

Citizen CL-S700 Specifications

General

Print Method	Thermal Transfer / Direct Thermal
Max Print Width	4.1 inches
Media Sensors	Reflective and transmissive
Ribbon Length	450 meters
Interfaces	Serial (RS-232C)
Print Speed	Up to 10 inches per second
Media Thickness	0.0025 to 0.010 inches