Citizen CLP-631 - Interfaces - Serial Interface Specifications

2-3. Operation Panel
CLP-621 & CLP-631 2-40
Service mode:
You can perform checks such as “head check” and “counter print” to print the total print
length since the printer is firstly used.
(3-2) How to enter the Factory/Service Mode
How to enter Factory/Service mode differs from the “user menu setup mode” operation.
However, once you have entered Factory/Service mode, the basic operation is the same
as that for the “user menu setup mode” explained in the User’s manual.
The Factory/Service mode menu appears at the top of the user menus as follows:
PAUSE
STOP
FEED
MODE/REPEAT
No / Next item / Increase item
Yes / Select / Save
Next digit
Exit the current menu or the
VuePrint menu system
The menu operation principle is the same as for the “user menu setup mode” operation.
The keys to be used and the functions are as follow:
All keys + POWER
Factory Mode menu
Service Mode menu
Page Setup menu
System Setup menu
After Print menu
Interface menu
Do you want to change the menu
settin
g
s? Yes=(PAUSE) No=(STOP)
To
p
menus
Added
[PAUSE (Yes)]
VuePrint
menu
system
Do you want to print the current menu
settin
[PAUSE (Yes)]
To print
g
s? Yes=(PAUSE) No=(STOP)
: Different operation from the “user menu setup mode”