2.2 Inside the Paper Cover
1: Print head (thermal)
Prints characters and graphic data on paper (paper rolls).
2: Paper end (PE) sensor
Detects when there is no paper. Printing stops when this sensor detects there is no
paper.
3: Platen
Feeds the paper.
Do not remove the platen except to do maintenance.
4: Auto cutter
Cuts the paper.
Refer to 5.3 Manual Setting of Memory Switches
5: Manual cutter
For cutting the paper manually when printing is finished.
6: Paper anti-curling roller
Roller for reducing the warp of the paper.
7: Paper anti-curling damper
Damper for reducing the warp of the paper.
– 24 –
To Next Page
Loading...
