Connecting a USB Device
The function assigned to each USB port differs.
Connect the USB device to be connected to the correct place in reference to the follow-
ing figure.
1: For peripheral device control
Connect a peripheral device.
The connected peripheral device can be controlled.
2: For host computer communication
Connect with a host computer.
The printer and host computer will communicate via USB.
Refer to 3.3 USB Interface
3: For supplying power
Connect a mobile device or other USB device.
Power can be supplied to a connected USB device.
* This port does not support USB data communication.
Refer to 3.8 USB Power Supply Port
Notes
n This port does not support USB data communication.
n Power may not be able to be supplied depending on the USB device to be used.
In this case, use the device’s dedicated AC adapter or battery charger.
n A USB cable for power supply is not included with this product.
Use a commercially available USB cable or the one that comes with the USB device.
n The Lightning model does not have a power supply function.
– 60 –
To Next Page
Loading...
