PRECAUTIONS ON PRINTER INSTALLATION
WARNING
n Do not use or store this product in a place where it will be exposed to:
* Flames or moist air.
* Direct sunlight.
* Hot airflow or radiation from a heating device.
* Salty air or corrosive gases.
* Ill-ventilated atmosphere.
* Chemical reactions in a laboratory.
* Airborne oil, steel particles, or dust.
* Static electricity or strong magnetic fields.
n These locations create the risk of printer damage, as well as product fail-
ure, overheating, emission of smoke, fire, or electric shock.
They can also result in fire or electric shocks and so should always be
avoided.
n Do not drop any foreign object nor spill liquid into the printer. Do not
place any object on the printer either.
n Do not drop any metallic object such as paper clips, pins or screws into
the printer.
n Do not place a flower vase, pot, or anything containing water on the
printer.
n Do not spill coffee, soft drinks, or any other liquid into the printer.
n Do not spray insecticide or any other chemical liquid over the printer.
n Dropping a metallic foreign object into the printer, may cause printer fail-
ure, fire, or electric shock.
Should it occur, immediately turn the printer off, unplug it from the sup-
ply outlet, and call your local Citizen Systems dealer.
n Do not handle the printer in the following ways:
l Do not subject the printer to strong impacts or hard jolts (e.g., being stepped
on, dropped or struck).
l Never attempt to disassemble or modify the printer.
n These actions create the risk of printer damage, as well as product fail-
ure, overheating, emission of smoke, fire, or electric shock.
They can also result in fire or electric shocks and so should always be
avoided.
– 7 –
To Next Page
Loading...
