Citizen CT-E651 - Page 50

50
——
5.2 Printing Paper
Use the paper shown in the following table or paper of the same quality.
Paper type Product name
Recommended
thermal roll paper
Nippon Paper TP50KR-2Y, TP50KJ-R
Oji Paper PD150R, PD160R, PD160R-63
Mitsubishi Paper Mills HP220AB-1, F230AA, P220AB
Koehler KT48-FA
(Unit: mm)
Max. printing width 72
Paper width 80
(Unit: mm)
+0
-1
Paper width 58
+0
-1
Printing surface
Printing width
φ83 or less
65-85 µm
48 (384 dot)
55
5
D d
3
Paper thickness (μm) 53 to 85
Core inner diameter d (mm) ø12
Core outer diameter D (mm) ø18
CAUTION
Use thermal paper that is wound as follows:
 Not creased and ts tight to the core.
 Not folded.
 Not glued to the core.
 Rolled with the printable side out.