Citizen CT-S281 - 4 Maintenance and Troubleshooting; Setting;Replacing Paper Rolls

— 26 —
4. MAINTENANCE AND TROUBLESHOOTING
4.1 Setting/Replacing Paper Rolls
1. Press the cover open button down.
2. Open the printer cover.
3. Insert a paper roll with the print surface facing down as shown on the figure
below and pull the paper end out of the printer.
4. Close the printer cover until a click can be heard.
WARNING
● When opening the printer cover, take care not to touch the print head or cutter blade.
Otherwise, burning or injury of hand may result.
CAUTION!
● Always use the specified types of paper roll.
● Confirm that the paper roll is set correctly.
● When the paper is skewed and not extended straightforward from under the cover,
open the cover and adjust the paper correctly.
● When closing the cover, press on the both front sides marked or the center of the cover
to close it firmly.
● When setting paper, pay attention not to let your fingers get injured by the edge of
paper.
● When setting a label paper roll to the printer, be sure that there is no uneven portion
on the roll paper side. If the roll paper side is uneven, set it evenly.
F
E
E
D
FEED
Cover open button