Citizen CT-S801 - Page 20

—17—
 Paper damper
Assists paper feed.
The components in the figure below are used in label-printing models and black
mark models.
 Paper damper stopper
Used to lock the paper damper.
 Black mark sensor
Detects black marks on black mark paper.
The sensor position is either M1 or M2, depending on the model
classification.
 Label sensor
Measures the length of label paper.
Refer to 1.3 Model Classification
Paper damper stopper
Label sensor
Black mark sensor (M1)
Label sensor
Black mark sensor (M2)