59
——
5.2 Printing Paper
Use the paper shown in the following table or paper of the same quality.
Paper type Product name
Recommended
thermal roll paper
Nippon Paper TP50KR-2Y, TP50KJ-R, TL69KS-LH
Oji Paper PD150R, PD160R, PD160R-63
Mitsubishi Paper Mills HP220AB-1, P220AB
Koehler KT48-FA
(Unit: mm)
Max. printing width 72
Paper width 80
+0
-1
Paper width 58
+0
-1
Printing surface
Printing width
83 or less
65-85 µm
48 (384 dot)
55
4
D
d
4
Paper thickness (μm) 53 to 85
Core inner diameter d (mm) ø12
Core outer diameter D (mm) ø18
CAUTION
Use thermal paper that is wound as follows:
Not creased and ts tight to the core.
Not folded.
Not glued to the core.
Rolled with the printable side out.
To Next Page
Loading...
