Citizen Eco-Drive Bluetooth S W410 - Functions Available with the Connection; Functions Available through the Dedicated App; Functions Available with the Watch; Before Connecting with a Smartphone

3/14
CITIZEN Eco-Drive Bluetooth S W410 Instruction manual
Before connecting with a smartphone
This watch communicates with smartphones through
Bluetooth Low Energy
power-saving communication technology.
You must install the dedicated app “
CITIZEN Eco-Drive Bluetooth S
” on your
smartphone and start it to make pairing (registration) between the phone and the
watch to connect them.
The flow of connection is as follows.
Install the dedicated app
Pairing (registration)
Connection
Start up the app
Disconnection
* The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc.
* Android is a registered trade mark of Google Inc.
* iOS is a name of an operating system of Apple Inc. IOS is a trademark or registered trademark of Cisco
in the U.S. and other countries and is used under license.
Compatible smartphones
You can see information about compatible smartphones (compatible with
Android OS 7.0/iOS 11.4
or newer) and the dedicated app at the link below.
http://www.citizenwatch-global.com/support/
About time reception
This watch receives time information from your smartphone at every connection
and adjusts the time and calendar automatically.
In addition, the watch makes temporary connection with the smartphone
automatically once a day to adjust time and calendar, even after disconnection
(automatic time reception). This will take place when it is exposed with sufficient
light after 3:00 AM on it.
•Pairing with a smartphone is required for the automatic time reception.
•When the watch is saving power (page
11
), the automatic time reception will
start after the power save is canceled.
•Automatic time information reception function does not work in the following
cases:
-
When the crown is not at position
0
.
-
Power reserve level of the watch is “0” (during insufficient charge warning).
Functions available with the connection
This watch can be connected with your smartphone through the dedicated app.
Functions available through the dedicated app
Power reserve check
You can check power reserve of the connected
watch, which is indicated on the screen of the app.
When disconnected, the latest power reserve before
disconnection is indicated in pale tone.
5
Power generation amount
check
You can check power generation amount of the watch
on the screen of the app.
5
Time reception
The watch adjusts time and calendar automatically
using time info provided from the smartphone.
3
6
World time
You can set times of various area in the world on the
watch through the map on the screen of the app.
6
Alarm
You can set up to three alarm times, activate/
deactivate alarm, and adjust alarm tone, volume and
sound-emitting times.
7
Notification
You can set the watch to receive notification of
incoming phone call, SNS messages or e-mails to your
smartphone.
When the watch receives a notification, the second
hand points [
CALL
] (incoming phone call) or [
INFO
]
(incoming SNS/e-mail message).
5
Notification setting
You can choose targets of notification and activate/
deactivate sound for notification.
8
Protraction of connection
time
You can extend connection time between the watch
and your smartphone up to 12 hours in 2-hour
increments.
8
Check and adjustment of
the reference position of the
watch
(Reference position
adjustment assistant)
The app assists adjustment of the reference position
of the watch.
9
Functions available with the watch
Pairing
Execute pairing when connecting the watch and your
smartphone for the first time.
4
Connection/disconnection
You can connect/disconnect the watch and the
registered smartphone.
4
Canceling the notification
indication
The second hand does not move while indicating
notification. In addition, some button operations
cannot be executed without canceling the notification
indication. You can cancel the indication by operating
the watch.
5
Activating/deactivating
alarm
You can activate/deactivate the alarm set through the
dedicated app.
7
Smartphone search
You can make the registered smartphone emit sound
with the watch to find it in a room.
9
Activating the flight mode
You can deactivate the function to connect with a
smartphone when required such as in a plane or a
hospital.
10