Citizen Eco-Drive Proximity - Disconnecting Watch from iPhone

Instruction manual: CITIZEN Eco-Drive Proximity
abc
4
Before connecting to iPhone
This watch communicates with iPhone through the connection of
Bluetooth 4.0, which is featured Bluetooth Low Energy (BLE) power-
saving technology.
It is required for connection to install and start up a dedicated app
“
CITIZEN ECO-DRIVE Proximity
” on a compatible iPhone.
The flow for connection is shown as follows.
Install the dedicated app
Start up the app
Registration/Pairing
Connection
Disconnection
• Screen in this manual may differ from the actual app.
iPhone connectable with this watch
To check the latest information on compatible iPhone and iOS, visit
the following sites:
• Citizen Watch global site: “
http://www.citizenwatch-global.com/
”
“
Service & Support
”
Set the mode to [
DCT
] (see page
6a
) to use this watch as a standard
one in places such as an airplane, where electronic devices are
limited to use.
iPhone is a trademark of Apple Inc., registered in the U.S. and other countries.
The Bluetooth® word mark and logos are registered trademarks owned by
Bluetooth SIG, Inc.
ACT
Cellular phone network
Time info
Functions available with the connection
Automatic adjustment of time and calendar [Time Sync]
The watch adjusts time and calendar automatically using time info
provided from the iPhone.
The second hand points
“
ACT
” while receiving time
info from iPhone.
CALL
Cellular phone network
Incoming call notification [Incoming Call]
Incoming call alert comes to the watch since iPhone’s call reception.
Incoming call info
The watch vibrates twice
and the second hand points
“
CALL
” as it receives
incoming call info.
Incoming
Call
MAIL
Schedule notification [Schedule Alert]
The watch receives schedule notification from the built-in Calendar
app on your iPhone, corresponding to the setting of the app.
Schedule notification
info
The watch vibrates twice
and the second hand
points “
MAIL
” as it receives
notification info.
Schedule
notification
MAIL
Email notification
info
Email reception notification [Email Alert]
Email alert comes to the watch since iPhone’s email reception to the
account set on the dedicated app.
The watch vibrates twice
and the second hand
points “
MAIL
” as it receives
notification info.
Cellular phone network
Email
notification
LL
Bluetooth connectable range
5 m (16-1/2 feet) to 10 m
(33 feet)
ACT
Bluetooth connectable range
5 m (16-1/2 feet) to 10 m
(33 feet)
Link Loss alart (Bluetooth disconnection notification) [Bluetooth Link Loss Alert]
The watch notifies iPhone’s disconnection due to their distance.
The watch vibrates twice and
the second hand points “
LL
” as
it detects disconnection.
The iPhone sounds
(depending on the setting)
as it receives the signal.
iPhone search [iPhone Search]
The watch sends signals to the registered iPhone within the
connectable range.
• This function is also available when they are disconnected.
The second hand points “
ACT
”
as it starts to send signals.