Citizen Eco-Drive Proximity - Watch Functions and Features; Time Sync

11
You can re-connect with the registered iPhone in the following cases:
• When the watch mode is set to [
TME
], [
L-TM
] or [
CT
]
• When the second hand indicates the second.
(While the second hand indicates a notification type, stop the notification indication by
pressing and holding either the lower right button or upper right button for two
seconds.)
1
Turn on Bluetooth on the iPhone.
2
Press and release the upper right button .
The watch and the iPhone are connected and the function hand on
the upper right sub dial of the watch points to the area (“
ON
” area)
illustrated on the right.
• The watch is also connected when its mode is changed to [
CT
].
Connecting to the registered (paired) iPhone [CT]
Function hand
on the upper
right sub dial