7
Registering (Pairing) with your iPhone [PR]
When connecting the watch and your iPhone for the first time, registration (pairing) is
required.
Before registration (pairing)
• Version check and update of firmware of the watch is required. (page
18
)
• For registration (pairing), you must operate both the watch and the iPhone.
• Be sure that the watch and the iPhone are fully charged.
Check the power reserve indication of the watch (page
23
) and charge it before
registration (pairing) if the power reserve level is “1” or “0”.
• The watch and the iPhone are connected after registration (pairing).
The time and date on the watch are updated after the time information is obtained from
the iPhone.
• You cannot register (pair) the watch with multiple iPhones.
To Next Page
Loading...
