17
Removing registration (pairing)
Delete the registration (pairing) information on both the watch and iPhone to remove
registration (pairing).
To remove the registration (pairing) information on the iPhone
1
Delete “Eco-Drive Proximity” on the “DEVICES” list on the Bluetooth setting.
To remove the registration (pairing) information on the watch
You can execute it when the following conditions are filled.
• When the watch mode is set to [
TME
], [
L-TM
] or [
CT
]
• When the second hand indicates the second.
(While the second hand indicates a notification type, stop the notification indication by
pressing and holding either the lower right button or upper right button for two
seconds.)
1
Press and hold the upper right button for 7 seconds or more.
The second hand makes a full rotation around, then returns to normal operation.
To Next Page
Loading...
