Citizen Eco-Drive Proximity - Registering a New iPhone

Registering (Pairing) with your iPhone [PR]
8
Registering (pairing) with the iPhone
• Registration (pairing) must be completed within about 2 minutes. If more than 2 minutes
has elapsed before finishing registration (pairing), the watch returns to the normal
operation.
1
Turn on Bluetooth on the iPhone.
2
Change the mode of the watch to [
PR
].
3
Tap “Eco Drive Proximity” on the “DEVICES” list in the Bluetooth setting of the
iPhone.
A dialog requesting pairing permission appears.
4
Tap “Pair”.
The watch and the iPhone are connected and the function hand on
the upper right sub dial of the watch points to the area (“
ON
” area)
illustrated on the right.
5
Change the mode to [
TME
] to finish the procedure.
Function hand
on the upper
right sub dial