Citizen H504 - Page 22

[Chronograph Second Hand Zero Positioning]
1. Pull the crown out to the time correction
position.
2.1) Press button (A) for 3 seconds or
more and release it, the watch enters
the chronograph second 0 position
correction mode.
2) Press button (A)to position the
chronograph second hand at the 0
position (12 o'clock position).
• The chronograph
second hand can be
advanced one second at a time (in the
clockwise direction) each time button
(A) is
pressed.
• The chronograph second hand can be advanced rapidlyby depressing
button (A) continuously.
3. Once the chronograph second has been positioned at the 0 position, reset
the time and return the crown to the normal position.
4. Press button (B) to check that the chronograph minute hand has been reset
to the 0 position.
Chronograph minute hand
Chronograph second hand
Button (A)
Button (B)
21