3/11
H874 Instruction manual
Checking the power reserve
For details of charging, see “Charging your watch” (page
8
).
1
Push the crown in to position
0
.
2
Press and release the lower right button
A
.
The function hand indicates the power reserve in levels.
3
Press and release the lower right button
A
to finish the procedure.
• The hand returns to normal indication automatically in 10 seconds without pressing
the button.
Indication of power reserve in levels
Level
3 2 1 0
Power
reserve
indication
Duration
(approx.)
180 - 130 days 130 - 70 days 70 - 2 days 2 days
Meaning
Power reserve is
sufficient.
Power reserve is
OK.
Power reserve is
getting low.
Insufficient
charge warning
has started.
OK for normal use Charge immediately.
• The function hand always indicates power reserve while power reserve level is “1”
or “0”.
World time
This watch can indicate the time around the world according to which of 24 time
zones (offsets from UTC — Coordinated Universal Time) is chosen.
• Signals to receive are different depending on the time zone you set.
Checking the time zone setting
1
Pull the crown out to position
1
.
The second hand indicates the current time zone setting.
Ex: when +9 is set as the time zone
• For time zones and positions of the second hand corresponding to them, see the
table.
2
Push the crown in to position
0
to finish the procedure.
The watch returns to normal indication.
Changing the time zone setting
1
Pull the crown out to position
1
.
The second hand indicates the current time zone setting.
2
Rotate the crown to select a time zone.
• For time zones and positions of the second hand corresponding to them, see the
table.
• The hands and indication move as you select a different one from the current one.
3
Push the crown in to position
0
to finish the procedure.
The watch returns to normal indication.
Correspondence of time zones and positions of the second hands
Second hand position Time zone Signal station
49 –11
◆United States50 –10
51 –9
52 –8
United States
53 –7
54 –6
55 –5
56 –4
◆United States
57 –3
58 –2
◆Germany
59 –1
0 0
Germany
1 +1
2 +2
◆Germany3 +3
4 +4
5 +5
◆China6 +6
7 +7
8 +8 China
9 +9 Japan
10 +10
◆Japan11 +11
12 +12
• Values on the “Time zone” column mean time difference between UTC and the
standard time of time zones.
• Time zones whose “Signal station” has ◆ mark in the table are out of reception
range and cannot receive its signals. Switching between summer time and standard
time must be executed manually there.
• It may be difficult to receive the time signal properly under certain environmental
conditions which prevent signals to reach.
To Next Page
Loading...
