iDP3550/3551 Service Manual
8 CITIZEN
7. Removing the Paper Cutter (iDP3550)
(1) While widening both sides of the printer cover as shown by the arrows, push the paper cutter toward
you to disengage it from the two claws.
• Reassembling the Paper Cutter (iDP3550)
While facing the cutter blade away from you, gently insert the paper cutter into the paper cutter mounting
slit on the printer cover until it is securely hooked by the two claws.
Paper Cutter
Printer Cover
Claw
Claw
Printer Cover
Paper Cutter
To Next Page
Loading...
