Citizen iDP3550 - Page 110

iDP3550/3551 User’s Manual
94
CITIZEN
CR
[Function] Printing
[Code] <0D>H
[Outline] This command prints the data. If the DIP switch segment 1-6 is set to OFF, the printer will
print the data in the print buffer and feed the paper by one line. If it is set to ON, the
printer will print the data in the print buffer and will not feed the paper.
ESC " " n
[Function] Setting the character right space
[Code] <1B>H <20>H n
[Range] 0 ≤ n ≤ 32
[Outline] This command sets the right space of the character.
[Caution] In the double width mode, the right space will be double the set amount. Set the space in
increments of half dot.
[Default] n = 0