Citizen iDP3550 - Page 84

iDP3550/3551 User’s Manual
68
CITIZEN
SI
[Function] Specifying the inverted character
[Code] <0F>H
[Outline] This command selects and prints the inverted characters. Enter it at the beginning of one
line. Otherwise, it will be invalid. Erect and inverted characters cannot be mixed in one
line.
DC2
[Function] Canceling the Inverted character
[Code] <12>H
[Outline] This command deselects the inverted characters. Enter this command at the beginning of
one line.
LF
[Function] Printing and paper feed
[Code] <0A>H
[Outline] If the print buffer contains the data, this command will feed the line after printing. If not,
the command only feeds the line.