iDP3550/3551 User’s Manual
76
CITIZEN
ESC"K"n1<0>m1m2... (Graphic Type)
[Function] Specifying the 8-dot standard density bit image
[Code] <1B>H <4B>H n1 <00>H m1 m2 ...
[Range] 1 ≤ n1 ≤ 115/2 (for DP650 mechanism)
1 ≤ n1 ≤ 140/2 (for DP652 mechanism)
1 ≤ n1 ≤ 180/2 (for DP654 mechanism)
1 ≤ n1 ≤ 200/2 (for DP657 mechanism)
[Outline] This command prints the bit image by the number of data specified with n1. Printing will
be unidirectional. The surplus data exceeding the printable quantity in one line will be
ignored. The printer will automatically return to the character mode after printing the bit
image.
To Next Page
Loading...
