iDP3550/3551 User’s Manual
77
CITIZEN
ESC "L" n1 n2 m1 m2 ... (Graphic Type)
[Function] Specifying the 8-dot double density bit image
[Code] <1B>H<4C>Hn1n2m1m2...
[Range] 1 ≤ n1 + 256 × n2 ≤ 230 (for DP650 mechanism)
1 ≤ n1 + 256 × n2 ≤ 280 (for DP652 mechanism)
1 ≤ n1 + 256 × n2 ≤ 360 (for DP654 mechanism)
1 ≤ n1 + 256 × n2 ≤ 400 (for DP657 mechanism)
[Outline] This command prints the 8-dot double density (half-dot print) bit image. Printing will be
unidirectional. The surplus data exceeding the printable quantity in one line will be
ignored. The printer will automatically return to the character mode after printing the bit
image.
The relations between the printing head pin numbers and the data are the same as the 8-dot
standard density bit image command, <ESC> "K.". When printing the double density bit
image, the horizontally adjacent dots cannot be printed.
ESC "h" n (Graphic Type)
[Function] Specifying/Canceling the double height character
[Code] <1B>H <68>H n
[Outline] The data following this command is printed in double height characters, except the bit image
mode <ESC> "K" and <ESC> "L". In combination with the <SO> command, this
command can print double height, double width characters.
It cannot be combined with the inverted character command, <SI>. The double height
characters and ordinary characters shall be bottom -justified.
To Next Page
Loading...
