iDP3550/3551 User’s Manual
80
CITIZEN
ESC BEL n1 n2
[Function] Setting the external device drive pulse width
[Code] <1B>H <07>H n1 n2
[Range] 1 ≤ n1 ≤ 127
1 ≤ n2 ≤ 127
[Outline] This command sets the power-on time to drive an external device(cash drawer).
Power-on time = n1 × 10 (ms)
Delay time = n2 × 10 (ms)
To actually drive the drawer, use the <BEL> and <FS> commands.
[Default] n1 = n2 = 20 (200ms)
BEL
[Function] Driving command A for drawer-1
[Code] <07>H
[Outline] This command drives the drawer connector no. 2 pin under the condition set with the
<ESC><BEL> n1 n2 command. This command is executed in order of entry into the input
buffer.
To Next Page
Loading...
