Pull the crown out two ‘steps’ to position 2 (time setting position). The second hand 2.
will rapidly advance to the 0-second position and stop.
Note:
If the second hand does not stop at the 0-second position, be sure to perform reference or •
0-position correction in reference or 0-position correction mode.
If the crown is pulled out two ‘steps’ to position 2 while the date is advancing, the date and •
function hand will stop at that position, and after the second hand has rapidly advanced to the 0
second position, the date will advance by remaining amount.
Rotate the crown to adjust the time.3.
(1) Rotate the crown to the right (clockwise) by 1 ‘click’ to move the 24-hour hand,
hour hand and minute hand clockwise.
(2) Rotate the crown to the left (counterclockwise) by 1 ‘click’ to move the 24-hour
hand, hour hand and minute hand counterclockwise.
Quickly rotate the crown 2 or more clicks consecutively to advance the hands •
rapidly. Rotate the crown to the left or right 1 click to stop rapid advance.
If the rapid advance is not stopped, the hand will automatically stop after “12 hours”
of rotation.
Adjust the watch according to a reliable time source and then return the crown to the 4.
closed position (normal position).
Setting the Time and Calendar2.
[Setting the Time]
Rotate the crown to align the mode hand with time/calendar [TME] mode as indicated 1.
on the mode sub dial.
Hour hand
24-hour hand
Second hand
Mode hand
Minute hand
(1) Calendar adjustment
position
(2) Time setting position
Closed position
(Normal position)
Date
(A)
(B)
To Next Page
Loading...
