Page 27
129) Aer installing the App v2.0, I am able to
successfully pair my iPhone® 5 or higher, but aer
a loss of Bluetooth® communication, I cannot
reconnect. I have SCAN turned “ON” in the App,
the iPhone® 5 or higher screen dims and turns
bright, but “Scan” never changes to “Proximity
Connect” in the Proximity App and a Bluetooth®
reconnection never occurs. How do I reconnect?
Proximity FAQ
is occurs as the stored Bluetooth® key in the
iPhone has become corrupt. To recover from this:
o
Shut down the App
Quickly press and release the home button
on your iPhone.
Press and hold the Proximity App until a “-”
symbol appears
Tap on the “-” symbol to close the App,
Press and release the home button on your
iPhone to return to the home screen
o
Tap on the ‘Settings’ App of the iPhone
o
Tap on Bluetooth®
o
Tap on the ‘Eco-Drive Proxi...’ device
o
Tap on ‘Forget this Device’
A pop up towards the bottom of the screen will
appear. Tap on ‘Forget Device’
You will be returned to the Bluetooth Device screen
o
You may also see a device displayed as ‘Peripheral’.
If so:
Tap on ‘Peripheral’,
Tap on ‘Forget this Device’
A pop up towards the bottom of the screen
will appear. Tap on ‘Forget Device’
o
Press and release the iPhone® home button to
return to your iPhone home screen
o
Tap on the Proximity App
o
Turn Scan ‘ON’
o
Pull the crown out one ‘click’ and rotate the crown
so the mode hand is pointing to ‘PR’ (pair mode).
o
Push the crown in one ‘click’
(continued next page)
To Next Page
Loading...
Need help?
General
