Citizen Red Arrows AT8060-50E - Page 15

28
29
English
Setting Daylight Saving TimeSetting Daylight Saving Time
Daylight Saving Time indication
(ON/OFF) (Chronograph minute hand)
Auto/Manual indication
(Chronograph 1/20 second hand)
Description
Enable Daylight Saving Time (ON)
Enable Standard Time (OFF)
Automatic setting (12 o’clock
direction)
Automatically switch
between Daylight Saving
Time and Standard Time by
receiving the signal.
• When a daylight saving time
check signal is received, the
daylight saving time ON/
OFF setting is changed.
Manual setting (6 o’clock direction) Manually switch between
Daylight Saving Time and
Standard Time.
• Even if a daylight saving time
check signal is received, the
daylight saving time ON/OFF
setting is not changed.
• SwitchingON/OFFofDaylightSavingTime→(Seepage 30)
• Auto/manualswitchingofDaylightSavingTime→(Seepage 31)
S
OK
RX
NO
M
T
W
T
F
S
00
50
10
20
30
80
90
4060
70
S
OK
RX
NO
M
T
W
T
F
S
00
50
10
20
30
80
90
4060
70
60
30
1050
2040
ON
SMT
OFF
60
30
1050
2040
ON
SMT
OFF
To automatically enable
Daylight Saving Time when
using the watch in an area
where the time signal can
be received:
To enable Daylight Saving
Time manually when the
time signal can not be
received:
To prevent the watch from
automatically enabling
Daylight Saving Time
through signal reception:
S
OK
RX
NO
M
T
W
T
F
S
00
50
10
20
30
80
90
4060
70
60
30
1050
2040
ON
SMT
OFF
60
30
1050
2040
ON
SMT
OFF
60
30
1050
2040
ON
SMT
OFF
S
OK
RX
NO
M
T
W
T
F
S
00
50
10
20
30
80
90
4060
70
S
OK
RX
NO
M
T
W
T
F
S
00
50
10
20
30
80
90
4060
70
Turn the daylight Saving
Time ON/OFF setting to
ON when you want to
enable Daylight saving
time.
Set the auto/manual
setting to manual and turn
the daylight saving time
ON/OFF setting to OFF.
Set the auto/manual setting
to auto (the watch will
automatically change the
daylight saving time ON/OFF
setting when receiving a daylight
saving time check signal.)