Citizen Red Arrows AT8060-50E - Checking and Correcting Reference Position; Understanding Reference Position; Correcting Reference Position

50
51
English
Checking and correcting the current reference position
Checking and correcting the current reference position
◆ What is the reference position?
The base position for all the hands to indicate the time and date.
If the reference
position is not at the correct position, the time and functions are not
indicated correctly.
Figure: Correct reference positions
• Hands:Allpointinthe12o’clock
direction.
• Date:Between"31"and"1"
1.
Ensure that the crown is in position 0 .
2.
Press and hold the upper right button Ⓑ for ten
seconds.
All hands and the date indicator move to indicate the current
reference position.
Correct the reference position by taking the following steps if
the position is not accurate.
3.
Pull the crown out to position 󱦱 .
This will enable you to correct the reference position.
Ⓑ
0 1 2
◆ Checking and correcting the current reference position