Citizen Red Arrows AT8060-50E - Charging Your Watch; Power Save Feature Operation; Canceling Power Save Mode; Checking the Power Reserve

16
17
English
Charging your watch
◆ Checking the power reserve
Checking the current power reserve.
Ⓐ
0 1 2
50
40
1. Ensure that the crown is in position
0
.
2.
Press and release the lower right button Ⓐ .
The chronograph minute hand moves to indicate
the power reserve.
• Fordetailsonthepowerreservelevel,seethe
next page.
3.
Press and release the lower right button Ⓐ
to finish the check procedure.
• Thecurrenttimeindicationwillresume
automatically when leaving the watch for
approx. 10 seconds.
Charging your watch
◆ Power save feature
When the watch is not exposed to light for 30 minutes or longer, such as when
you store it in a dark place, the second hand automatically stops to save the power.
However, the watch continues to work internally.
• Whenthecrownisinposition1or2,thepowersavefeaturewillnotactivate.
• Thepowersavefeaturecannotbeactivatedordeactivatedmanually.
◆ To cancel the power save feature
When the watch is exposed to light sufficient for charging, the power save feature
is automatically canceled and normal time indication will resume.
Note: You cannot perform this operation when
using the chronograph.