Connecting to the registered iPhone [
CT
]
You can also reconnect the watch and the iPhone by
changing the mode of the watch.
1
Change the mode to [
CT
].
(See pages
18
and
19
)
The second hand moves to indicate
“
ACT
”. When successfully connected, the
movement of the second hand returns
to normal and the function hand on the
upper right sub dial indicates “
ON
” area.
• It may take up 20 to 30 seconds to
complete the reconnection.
2
Change the mode to either [
TME
] (or [
L-TM
]) to
finish the procedure.
(See pages
18
and
19
)
Function hand
on the upper
right sub dial
45
To Next Page
Loading...
