You can reconnect with the registered iPhone again in the following cases:
• When the function hand on the upper right sub dial indicates “
OFF
” area.
• When the watch mode is set to [
TME
], [
L-TM
], [
PR
] or [
CT
].
• When the second hand indicates the second.
(While the second hand indicates a notification type, stop the notification
indication by pressing and holding either the lower right button
or upper right
button
for two seconds.)
1
Confirm the switch of “Scan” or “Waiting for Reconnection”
is “ON” on the app’s screen.
2
Press and release the upper right button .
The second hand moves to indicate “
ACT
”. When successfully
connected, the movement of the second hand returns to normal
and the function hand on the upper right sub dial indicates “
ON
”
area.
• It may take up 20 to 30 seconds to complete the reconnection.
Connecting to the registered iPhone [
CT
]
Function hand
on the upper
right sub dial
44
To Next Page
Loading...
