Using the chronograph [
CHR
]
• After one hour of continuous chronograph operation, the chronograph
automatically stops and is reset. Pulling out the crown will also stop and reset the
chronograph.
• The time reflected by the hour and minute hands and 24-hour hand on the upper
left sub dial will be that of the time set in [
TME
] or [
L-TM
] mode.
Upper right button :
Start/Stop/Restart
measurement.
Lower right button
: Reset
• Press and release this
button to reset the
chronograph after timing.
The chronograph minute
hand:
This indicates the elapsed
minutes (up to 60) while
using the chronograph.
Second hand:
This indicates the
elapsed seconds
while using the
chronograph.
71
To Next Page
Loading...
