Citrix | ADC Quick Start Guide: MPX 16000T appliance
Installation
Installation involves rack-mounting the appliance, installing transceivers (if available), and connecting
the appliance to the network and a power source.
Note: The appliances illustrated in the installation instructions might not represent the actual ADC
appliance.
Rack mounting the appliance
The appliance is shipped with rack-rail hardware. This hardware consists of two inner rails that you
attach to the appliance, one on each side, and a rack-rail assembly that you attach to the rack. The
following figure illustrates the steps involved in mounting the Citrix ADC appliance to a rack.
Figure 3. Rack mounting the appliance
To Next Page
Loading...
