Driving
126
In exceptional circumstances, the
gearbox may need an automatic
reinitialisation: starting and gear
changing are no longer possible.
Operating fault
With the ignition on, if this warning
lamp comes on and AUTO flashes,
accompanied by an audible signal
and a message in the multifunction
screen, this indicates a gearbox
fault.
Have it checked by a CITROËN
dealer or a qualified workshop.
Reinitialisation
(5-speed electronic
gearbox)
AUTO and - - appear in the
instrument panel.
F Select position N.
F Press the brake pedal.
F Wait for around 30 seconds until N or a
gear appears in the instrument panel.
F Move the gear selector to position A, then
to position N.
F With your foot still on the brake pedal, start
the engine.
The gearbox is operational again.
AUTO and - - appear in the
instrument panel.
Follow the procedure described above.
Following disconnection of the battery, it is
necessary to reinitialise the gearbox.
F Switch on the ignition.
To Next Page
Loading...
