11
Practical information
173
Taking out the wheel
F Unscrew the yellow central bolt.
F Raise the spare wheel towards you from
the rear.
F Take the wheel out of the boot.
Putting the wheel back in place
F Put the wheel back in its housing.
F Unscrew the yellow central bolt by a few
turns then put it in place in the centre of the
wheel.
F Tighten fully until the central bolt clicks to
retain the wheel correctly.
F Put the box back in place in the centre of
the wheel and clip it.
F Put the polystyrene storage box back in
place.
F Refit the boot floor carpet by lightly folding
it in two (refer to the "Boot fittings" section).
On vehicles equipped with a "space-
saver" type spare wheel, the punctured
wheel cannot be stowed in place of the
"space-saver" wheel.
To Next Page
Loading...
