04
248
NAVIGATION - GUIDANCE
Adding a stage
Press NAV to display the
" Navigation - guidance " menu.
Select " Journey leg and route " then
confi rm.
Select " Close to " a route passing
close to the stage or " Strict " for a route
passing through the stage.
Confi rm " OK " to start the guidance, and
give a general indication of the guidance
route.
Select " Add a stage " then confi rm .
The address of the stage is entered as
a destination, by " Enter an address ",
a contact in " Directory ", or " Previous
destinations ".
Organising stages
To organise stages, carry out operations 1
to 2 again, then select " Order/delete
journey legs " and confi rm.
Select and confi rm to save the
modifi cations.
Select the stage that you want to move
in the order.
Select " Delete " to delete the stage.
To Next Page
Loading...
