2
MULTIFUNCTION SCREENS
58
Monochrome screen C
You can choose between two types of
display by pressing button A :
-
the trip computer information appears
temporarily above the audio informa-
tion, displayed permanently in full
screen,
or
- the trip computer and audio infor-
mation both appear permanently in
a shared screen.
Information displays
- the current information tab
with:
● the range,
●
the current fuel
consumption,
● the Stop & Start time
counter,
- the trip "1" tab with:
● the distance travelled,
● the average fuel
consumption,
● the average speed,
for the fi rst trip.
- the trip "2" tab with:
● the distance travelled,
● the average fuel
consumption,
● the average speed,
for the second trip.
Press the button, located at the end
of the wiper stalk , to display the
various trip computer tabs in suc-
cession.
When the trip required is displayed,
press the button on the end of the wiper
stalk for more than two seconds.
Trips "1" and "2" are independent but
their use is identical.
For example, trip "1" can be used for
daily fi gures, and trip "2" for monthly
fi gures.
Trip zero reset
To Next Page
Loading...
