3
COMFORT
74
Storing driving positions
System which registers the electrical
settings of the driver's seat and door
mirrors. It enables you to store and re-
call two positions using the buttons on
the side of the driver's seat.
Storing a position
Using buttons M / 1 / 2
Switch on the ignition.
Adjust your seat and the door mir-
rors.
Press button M , then press button 1
or 2 within four seconds.
An audible signal indicates that the
position has been stored.
Recalling a stored position
Ignition on or engine running
Press button 1 or 2 to recall the cor-
responding position.
An audible signal confi rms that ad-
justment is complete.
You can interrupt the current
movement by pressing but-
ton M , 1 or 2 or by using one of
the seat controls.
A stored position cannot be re-
called while driving.
Recalling stored positions is
deactivated 45 seconds after
switching off the ignition.
Storing a new position cancels
the previous position.
To Next Page
Loading...
