The cargo net can be used behind
the rear seats (row 2) when the
luggage-cover blind is not fi tted, or
behind the front seats (row 1).
when using behind the front
seats, the backrests and the seat
cushions must be folded down
(see section on rear seats).
Fold down the backrests of the
Position the cargo net roller over
the rear seats (2/3 benchseat).
tioned over the two rails.
and push the roller (lengthwise)
from right to left to lock it in.
Put the backrests of the rear
benchseat, unroll the cargo net
by pushing it to disengage the
Position one of the ends of the
cargo net’s metal bar in the corre-
sponding fi xing location. Ensure
that the notch is correctly lodged
in the rail located inside the loca-
Position the other notch in the
2nd fi xing location and pull the
Unroll the cargo net and posi-
tion one of the ends of the net’s
metal bars in the corresponding
fi xing location. Ensure that the
notch is correctly lodged in the
rail located inside the location
Pull on the cargo’s net’s metal
bar to position the other notch in