A U TO M AT I C A I R C O N D I T I O N I N G
Operating the air conditioning sys-
ventilation inside the cabin.
The value indicated on the
display corresponds to a comfort
level and not to a temperature in
One or more functions can be
adjusted manually, while still retain-
ing the other functions in automatic
Press on any of the buttons, except
Changing to manual mode may
result in a decrease in comfort
level (temperature, humidity, smell,
misting) and is not advised for opti-
The air fl ow level is indicated by the
progressive lighting of the ventilator
By reducing the air fl ow to its mini-
mum setting, the air conditioning
system switches itself off (OFF).
To prevent misting and poor air qual-
ity in the passenger compartment, take
care to maintain a suffi cient fl ow of air.
4. Adjusting the air fl ow
The air fl ow can only be adjusted
To adjust the air fl ow, press button:
Air conditioning only works
The air blower button (air
be activated to obtain air
should be used with the windows
the recirculation of air in
6. Air recirculation – Entry
passenger's side air fl ow distri-
The symbol (arrows) correspond-
ing to the chosen distribution lights
Windscreen and front windows.
Front air vents (central, side
and soft diffusion grille if open)
Front and rear footwells.
You cannot select distribu-
tion to the windscreen/front win-
dows and to the front/rear air vents
Entry of air in automatic
Automatic mode uses an air qual-
ity sensor. This analyses the air and
isolates the passenger compartment
from the exterior, as soon as it detects
the presence of pollutants. In this case,
it automatically activates recirculation
of passenger compartment air.
this function cannot detect
and therefore protect the passenger
compartment from bad smells not
linked to pollutants. It is not active
when the outside temperature is
below +5°C in order to protect against