Practical information
200
C5_en_Chap08_information_ed01-2015
Wing-mounted lamps
F Pull away the flap in the boot side trim A.
To do this, pull it towards the middle of the
boot, then pull it up.
F Disconnect the connector B.
F Unscrew the fixing nut C.
F Remove the lamp from its housing.
F Detach the bulb holder D.
F Replace the faulty bulb.
F Refit the bulb holder D.
F Place the lamp in its housing.
F Screw in the fixing nut C.
F Refit the connector B.
F Refit the side boot trim A.
For vehicles fitted with a Hi-Fi amplifier, on the
right hand side slacken the screw by a quarter
turn, then pull the boot side trim A up.
You can use the wheelbrace to screw or
unscrew the fixing nut C.
To Next Page
Loading...
