Press the SOURCE button several
times in succession and select the
Press the BAND button to select a
waveband: FM1, FM2, FMast, AM.
Briefl y press one of the buttons to
carry out an automatic search of the
Press one of the buttons to carry out
a manual search of the radio stations.
Press the LIST button to display the
list of stations received locally
To update this list, press for more than
The external environment (hills, buildings, tunnels, basement car parks, ...) may block reception,
including in RDS mode. This is a normal effect of the way in which radio waves are transmitted and does
not indicate any failure of the audio equipment.
Select ACTIVATE FREQUENCY
FOLLOWING (RDS) then press OK.
RDS appears on the display.
PREFERENCES function then press
Select AUDIO FUNCTIONS then
The RDS, if displayed, enables you to continue listening to the same
station by automatic retuning to alternative fequencies. However, in
certain conditions, coverage of an RDS station may not be assured
throughout the country as radio stations do not cover 100 % of the
territory. This explains the loss of reception of the station during a
ACTIVATE FREQUENCY FOLLOWING (RDS)
ACTIVATE FREQUENCY FOLLOWING (RDS)