INDEX OF ILLUSTRATIONS I
No. of
COMPONENT
Illustration
DESCRIPTION
ENGINE . . . . . . . . . . . . . . . . . . . . . . . . . 1 Longitudinal section.
2 Cross section.
4 Valve seats.
5 Fitting of valves.
6 Calibration of springs.
7 Cylinder head.
8 Replacement of valve guides.
9 Replacement of valve guides.
10 Oil pump.
11 Adjustment of oil pump.
12 Fitting cylinder barrel joints.
13 Piston and connecting rod.
14 Assembly of oil seals.
15 Setting timing wheels.
16 Various tools.
17 Various tools.
18 Stands for dismantled engine.
19 Stand for dismantled engine-gearbox assembly.
20 Checking the distance between support and crossmember.
21 Adjusting the longitudinal position of rear engine supports.
22 Adjusting the height of rear engine supports.
23 Adjusting centres of rear engine supports.
24 Spanners for adjustment of rear engine supports.
25 Engine and gearbox assembly.
CARBURETTOR . . . . . . . . . . . . . . . . . . . . . . 26 Weber 24/30 DCZCI.
27 Zenith 24-30 EEAC.
28 Controls – Filters.
PETROL PUMP . . . . . . . . . . . . . . . . . . . . . . . 29 Section of GUIOT pump.
30 Inspection for leaks.
IGNITION . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31 Contact breaker.
32 Adjusting the synchronisation of the breakers.
33 Testing ignition coil.
34 Testing ignition coil insulation.
PULLEYS AND TENSIONS . . . . . . . . . . . . . 35 Belt tensions.
36 Alignment of pulleys.
To Next Page
Loading...
